Monday, 18 March 2013
- fully implemented commands: SET MAX, SET SECURITY, Device Configuration Overlay
- device access with interrupt 13h, direct via ATA ports, with ASPI drivers
- detects ATA/ATAPI/SATA/SATA with NCQ devices with on-board and add-on controller cards
- detects USB devices via USB ASPI driver only
- detects SCSI hard drives via INT13h or ASPI drivers
- other SCSI devices are detected via ASPI drivers only (must be loaded before)
- with ASPI drivers you got more informations about SCSI devices
- test and repair device for bad sectors
- many different test-functions for hard drives
- resize hard drives which supports SET MAX ADDRESS/EXT (supports 28/48-bits LBA addressing modes)
- drive lock detection via security feature (Security Menu)
- S.M.A.R.T. functions for ATA/SATA and SCSI/USB drives only
- informations about devices (ATA/ATAPI, INT13h, ASPI)
- sector viewer for devices (also for ZIP, CD-data discs)
- to access ATA/SATA CD-ROM drive you don?t need any driver or MSCDEX
- enable/disable some features for direct-access devices
- Device Configuration Overlay (DCO) feature set (you can restore a full capacity or allow/disallow some feature sets of hard drive)
